2. Download your freedom software from http://www.your-freedom.net/index.php?id=downloads
After proper sign up and download, configure your computer as shown in the picture illustration below.
Step 1:- Install the software, after a successful installation, launch the software and it will look like the picture below.
Step 2:- Click on configure and a new window will pop out where you can configure it.
Connection Mode: DNS
Step 3:- Click on “account information” tab and insert the username and password you use to register on www.your-freedom.net
Step 4:-Click on Save and Exit below the tab then return to the main window. Then click on the port tab and click on the two boxes as shown in the picture below.
After proper configuration as shown in the steps above, exit the software and relaunch it again and leave it to connect it self. If connected successfully, it will look like the image below: IF IT DOES NOT CONNECT PLEASE CLICK START CONNECT YOUR SELF
Once the software shows something of this nature, that means you are connected to the internet. But if the little door you are seeing in the software is closed or show a red exclamation mark in between the door, that means your settings is not correct or the network is bad at the point of configuration.
HOW TO CONFIGURE BROWSER AND OTHE APLLICATIONS LIKE SYPE NA D MESSENGERS AND GAMES
You have one more step to go to finish the whole configuration. The last step is that you should go to your browser. Let us take Mozilla Firefox as an example, click on tools ==> Option ==> Advance tab ==> Network ==>Settings then tick on manual configuration and set your:
Http proxy: 127.0.0.1 port: 8080
Socks Host: 127.0.0.1 port: 1080
Set the rest of the proxy to 127.0.0.1 and port to 8080
I other applications like sype, please insert the proxy 127.0.0.1 and port 8080 in the proxy settings of the application to get it working…….
SINUP AS MANY USERNAMES AND PASWORDS FROM YOU FREEDOM SITE AS YOU WONT USING DIFREENT EMAILS
THANKS TO FREEMAN WARREN