How to setup the tweak on PC
Step 1: Firstly, go to PDProxy website and register, then download their zip file.
Step 2: After downloading the pdproxy zip file, then unzip and install. Then allow installation the Tap driver that you're prompted to install.
Step 3: Once the installation is completed, then select server (i.e Demo server 1 or 2), and select UDP as the protocol.
Step 4: Once the above procedure is completed, then go to settings >> advance settings >> proto option, then insert 53 as UDP port
Step 5: After the above setup, below parent proxy, tick on the "Enable Parent Proxy" box and enter 18.104.22.168 as the IP and 80 as the port.
Save and connect...